Home > Power Driver Modules >

IPM Module AOS AIP5D15K060Q4 with Trench Shielded Planar Gate IGBT and Multiple Protection Features

Product Categories

Bipolar Transistor Arrays [120]
Bridge Rectifiers [1296]
JFETs [73]
Single Bipolar Transistors [2284]
Power Driver Modules [154]
Current Regulation - Diodes, Transistors [4]
Single IGBTs [536]
DIACs, SIDACs [39]
Single, Pre-Biased Bipolar Transistors [1334]
SCRs [158]
SCRs - Modules [48]
TRIACs [535]
RF Diodes [12]
Single Diodes [3000]
Single Zener Diodes [3000]
Variable Capacitance (Varicaps, Varactors) [79]
Single FETs, MOSFETs [3000]

Hefei Purple Horn E-Commerce Co., Ltd.

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

IPM Module AOS AIP5D15K060Q4 with Trench Shielded Planar Gate IGBT and Multiple Protection Features

Description : Power Driver Modules RoHS

Mfr. Part # : AIP5D15K060Q4

Model Number : AIP5D15K060Q4

Contact Now

AIP5D15K060Q4 / AIP5D15K060Q4S Intelligent Power Module

Product Overview

The AIP5D15K060Q4 / AIP5D15K060Q4S is a Dual-In-Line Package Intelligent Power Module (IPM) designed for 3-phase inverter applications. It features a Trench Shielded Planar Gate IGBT with integrated HVIC drivers, offering robust protection mechanisms including control supply under-voltage lockout (UVLO), over-temperature (OT) protection, temperature monitoring (VOT), and short-circuit current protection (CSC). The module boasts a wide input interface (3-18V) with Schmitt trigger receiver circuits and isolation ratings of 2000Vrms. It is ideal for AC 100-240Vrms class low power motor drives found in washing machines, compressors, fan motors, cleaners, and air conditioners.

Product Attributes

Brand: AOS (Alpha and Omega Semiconductor)
Certifications: UL Recognized (UL1557 File E345245)
Compliance: RoHS compliant, AOS Green Products (reduced levels of Halogens)
Package Type: Dual-In-Line Package (IPM-5 / IPM-5A)

Technical Specifications

Model	External View Size (mm)	Voltage Rating	Current Rating	Temperature Range (C)	Isolation Rating (Vrms/min)	Description
AIP5D15K060Q4	33.4 x 15 x 3.6	600V	15A	-40 to 150	2000	IPM-5, Normal Pin Length
AIP5D15K060Q4S	33.4 x 15 x 3.6	600V	15A	-40 to 150	2000	IPM-5A, Short Pin Length

Key Features

600V-15A (Trench Shielded Planar Gate IGBT)
3 phase Inverter module including HVIC drivers
Built-in bootstrap diodes with integrated current-limiting resistor
Control supply under-voltage lockout protection (UVLO)
Over-temperature (OT) protection and temperature monitoring (VOT)
Short-circuit current protection (CSC)
Controllable fault out signal (VCF)
Wide input interface (3-18V), Schmitt trigger receiver circuit (Active High)

Applications

AC 100-240Vrms class low power motor drives
Washing machines
Compressors
Fan Motors
Cleaners
Air-conditioners

Pin Configuration

Refer to the provided diagrams for detailed pin configuration.

Absolute Maximum Ratings

Symbol	Parameter	Conditions	Ratings	Units
VPN	Supply Voltage	Applied between P - NU,NV,NW	450	V
VPN(surge)	Supply Voltage (surge)	Applied between P - NU,NV,NW	500	V
VCES	Collector-Emitter Voltage		600	V
IC	Output Phase Current	TC=25C, TJ<150C	15	A
IC	Output Phase Current	TC=100C, TJ<150C	7.5	A
IPK	Output Peak Phase Current	TC=25C, less than 1ms pulse width	30	A
tSC	Short Circuit Withstand Time	VPN400V, TJ=150C, VDD=15V	5	s
PC	Collector Dissipation	TC=25C, per chip	28	W
TJ	Operating Junction Temperature		-40 to 150	C
VDD	Control Supply Voltage	Applied between VDD-COM	25	V
VDB	High-Side Control Bias Voltage	Applied between VB(U)-U, VB(V)-V, VB(W)-W	25	V
VIN	Input Voltage	Applied between IN(UH), IN(VH), IN(WH), IN(UL), IN(VL), IN(WL) COM	VDD0.5	V
VCF	Fault Output Supply Voltage	Applied between VCF-COM	50.5	V
ICF	Fault Output Current	Sink current at VCF terminal	1	mA
VSC	Current Sensing Input Voltage	Applied between CSC-COM	50.5	V
VOT	Temperature Output	Applied between VOT-COM	50.5	V
VPN(PROT)	Self Protection Supply Voltage Limit (Short-Circuit Protection Capability)	VDD=13.5-16.5V, Inverter part TJ=150C, Non-repetitive, less than 2s	400	V
TC	Module Case Operation Temperature	Measurement point of TC is provided in Figure 1	-30 to 125	C
TSTG	Storage Temperature		-40 to 150	C
VISO	Isolation Voltage	60Hz, sinusoidal, AC 1min, between connected all pins and heat sink plate	2000	Vrms

Thermal Resistance

Symbol	Parameter	Conditions	Max.	Units
Rth(j-c)Q	Junction to Case Thermal Resistance (Inverter IGBT per 1/6 module)		4.5	K/W
Rth(j-c)F	Junction to Case Thermal Resistance (Inverter FWD per 1/6 module)		6.9	K/W

Electrical Characteristics

Symbol	Parameter	Conditions	Min.	Typ.	Max.	Units
VCE(SAT)	Collector-Emitter Saturation Voltage	VDD=VDB=15V, VIN=5V, IC=7.5A, TJ=25C	-	1.60	2.00	V
VCE(SAT)	Collector-Emitter Saturation Voltage	IC=7.5A, TJ=125C	-	1.90	-	V
VF	FWD Forward Voltage	VIN=0, IF=7.5A, TJ=25C	-	1.55	2.00	V
tON	Switching Times	VPN=300V, VDD=VDB=15V, IC=7.5A, TJ=25C, VIN=0V 5V Inductive load (high-side)	0.40	0.70	1.20	s
tC(ON)	Switching Times		-	0.10	0.40	s
tOFF	Switching Times		-	1.00	1.50	s
tC(OFF)	Switching Times		-	0.10	0.30	s
trr	Switching Times		-	0.10	-	s
ICES	Collector-Emitter Leakage Current	VCE=VCES, TJ=25C	-	-	1	mA
ICES	Collector-Emitter Leakage Current	VCE=VCES, TJ=125C	-	-	10	mA
IQDD	Quiescent VDD Supply Current	VDD=15V, IN(UH,VH,WH,UL,VL,WL) =0V	-	-	2.1	mA
IQDB	Quiescent VDB Supply Current	VDB=15V, IN(UH, VH, WH)=0V	-	-	0.3	mA
VSC(ref)	Short-Circuit Trip Level	VDD=15V (2)	0.45	0.48	0.51	V
UVDT	Supply Circuit Under-Voltage Protection Trip Level		10.3	11.4	12.5	V
UVDR	Supply Circuit Under-Voltage Protection Reset Level		10.8	11.9	13.0	V
UVDBT	Supply Circuit Under-Voltage Protection Trip Level		8.5	9.5	10.5	V
UVDBR	Supply Circuit Under-Voltage Protection Reset Level		9.5	10.5	11.5	V
VOT	Temperature Output	LVIC Temperature=80C, R=10k (3)	2.36	2.45	2.55	V
VOT	Temperature Output	LVIC Temperature=25C, R=10k (3)	0.77	1.00	1.25	V
OTT	Over-Temperature Protection	Detect LVIC Temperature Trip Level, VDD=15V (4)	110	130	150	C
OTHYS	Over-Temperature Protection Hysteresis of Trip Reset		-	30	-	C
VCFH	Fault Output Voltage	VSC=0V, VCF Circuit: 10k to 5V pull-up	4.9	-	-	V
VCFL	Fault Output Voltage	VSC=1V, VCF Circuit: 10k to 5V pull-up	-	-	0.5	V
VCF+	CF positive going threshold		-	1.9	2.2	V
VCF-	CF negative going threshold		0.8	1.1	-	V
tFO	Fault Output Pulse Width	(5)	20	-	-	s
IIN	Input Current	VIN=5V	-	1.0	-	mA
Vth(on)	ON Threshold Voltage	Applied between IN(UH), IN(VH), IN(WH), IN(UL), IN(VL), IN(WL)-COM	2.3	2.6	-	V
Vth(off)	OFF Threshold Voltage		0.8	1.2	-	V
Vth(hys)	ON/OFF Threshold Hysteresis Voltage		-	1.1	-	V
VF(BSD)	Bootstrap Diode Forward Voltage	IF=10mA Including Voltage Drop by Limiting Resistor (6)	0.5	1.0	1.5	V
RBSD	Built-in Limiting Resistance	Included in Bootstrap Diode	80	100	120

Recommended Operation Conditions

Symbol	Parameter	Conditions	Min.	Typ.	Max.	Units
VPN	Supply Voltage	Applied between P-NU, NV, NW	0	300	400	V
VDD	Control Supply Voltage	Applied between VDD-COM	13.5	15.0	16.5	V
VDB	High-Side Bias Voltage	Applied between VB(U)-U, VB(V)-V, VB(W)-W	13.5	15.0	18.5	V
dVDD/dt, dVDB/dt	Control Supply Variation		-1	-	1	V/s
tded	Arm Shoot-Through Blocking Time	For each input signal	1.0	-	-	s
fPWM	PWM Input Frequency	-40C < TJ < 150C	-	-	20	kHz
PWIN(ON)	Minimum Input Pulse Width	(8)	0.5	-	-	s
PWIN(OFF)	Minimum Input Pulse Width	(8)	0.5	-	-	s
COM	COM Variation	Between COM-NU, NV, NW (including surge)	-5.0	-	5.0	V

Mechanical Characteristics

Parameter	Conditions	Min.	Typ.	Max.	Units
Mounting Torque	Mounting Screw: M3 (7)	0.59	0.69	0.78	N m
Weight		-	5.25	-	g
Flatness	Refer to Figure 6	-50	-	100	m

Notes on Protection Functions

Short-Circuit Protection (SC): Works only for low sides with an external shunt resistor and RC filter.
Over-Temperature Protection (OT): When LVIC temperature exceeds the trip level (OTT), OT protection is triggered and fault outputs. The IPM does not automatically shut down IGBTs; the controller (MCU) should stop the IPM.
Fault Output (VCF): Controllable fault out signal corresponding to SC, UV, and OT faults. Pulse width can be fixed (min 20s) or controlled.
Temperature Monitoring (VOT): Can be used simultaneously with OT protection or independently with a 10k resistor connection.

Application Circuit Notes

Bootstrap diodes' negative electrodes should be connected directly to U, V, W pins.
Shunt resistor wiring should be short to prevent SC level fluctuation.
Ground wiring should be short to prevent noise interference.
Control and power grounds should be connected at a single point (N1).
It is recommended to use only the (15) COM pin for common supply ground.
Zener diodes are recommended between control supply pins for surge protection.
Bus capacitors should be placed close to P and N1 terminals.
RC filter components for CSC and VOT should be tight tolerance and temperature-compensated.
Input drives are active-high with a minimum 3.5k pull-down resistor.
VCF output is open drain and requires a pull-up resistor.
Direct drive from MCU is possible without opto-coupler or isolation transformer.
Line ripple voltage should be limited (dV/dt 1V/s, Vripple 2Vp-p).

Package Dimensions

Refer to Figures for IPM-5 and IPM-5A package dimensions.

2411071614_AOS-AIP5D15K060Q4_C20266176.pdf

IPM Module AOS AIP5D15K060Q4 with Trench Shielded Planar Gate IGBT and Multiple Protection Features Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Hefei Purple Horn E-Commerce Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!